1625 Surface Mount Wedge Barrier System


The Wedge Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths. The Wedge Barrier must be used with the 1602-590 operator (sold separately).

1625 Surface Mount Wedge Barrier System

COST SAVINGS IF YOU DON’T NEED A CRASH SYSTEM*

Help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.

The DKS Wedge Barrier Accessory System is designed to be used with the 1602-590 operator. The Wedge Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards, wedges or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths.

 

Certification to ASTM F2656-20
Pending
A vehicle weighing 5,070 lb traveling at 30 mph will not shear or budge the 1625 Wedge on direct impact.

CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.
* This Wedge Barrier System is not crash-rated. It is intended to provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.

 

1602-590 Operator
Premium Accessory
Affordable Install with
Surface Mount Design
23.5″ Tall Wedge Barrier
for Light Duty Trucks

 

Applications

apartment icon
Apartment Complexes & College Residence Halls
commercial industry icon
Commercial & Industrial
Gated Communities & Apartment Complexes Solutions
Gated Communities
maximum security icon
Maximum Security
mix used icon
Mixed Use Buildings
parking icon
Parking Facilities
self storage icon
Self Storage

Product Features

 

DKS Doorking 1625 traffic control Tall Wedge

 

Stop Them with the 23.5” Tall Wedge

The heavy-duty reinforced steel wedge and posts are engineered to deliver debilitating damage to passenger vehicles and light-duty trucks attempting to drive through a controlled traffic lane. Not only tough but fast too, the Wedge raises and lowers in approximately 3.5 seconds, stopping vehicles with a reinforced surface area of 23.5” high by up to 13’ 8” wide of solid steel — backed by the simple physics of a timeless Wedge.

 

DKS Doorking 1625 traffic control

 

Demand Respect with the 1625 Wedge

The 1625 Wedge Barrier System provides the engineering and physical theft to stop barrier runners in their tracks — preventing theft, additional costly repairs, and further damage.

The 1625 is counter balanced and designed for simple mechanical linkage to the 1602-590 Operator, keeping Barrier Arm and Wedge Barrier in sync — with no separate motors or hydraulic valves to worry about.

%%tb-image-alt-text%%
Lighted Top Arm

for added visibility and safety

%%tb-image-alt-text%%
Surface Mount

for quick and easy installation or where inground digging is prohibitive

%%tb-image-alt-text%%
Heavy Duty

Reinforced Steel Wedge damages barrier runners vehicles

%%tb-image-alt-text%%
Fast Raise and Lower

of the heavy steel wedge is possible with the use of precise counterweight

Technical Specifications

Specifications
  • Anchor Plates are 1/2 in (12.7mm) A36 steel
  • Anchor post assembly are surface mounted and provide fourteen (14) anchor points
  • Wedge barrier is counter-balanced and mechanically linked to the 1602-590 operator. No hydraulics or environmental issues to worry about.
  • Lane barrier assembly is zinc plated and finished in power-coat full gloss smooth super polyester

 

1625 Wedge Barrier

  • Steel wedge barrier and heavy duty steel posts provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane, without the expense of bollards, wedges, or crash beams. (Not crash rated.)
  • Surface mount (concrete only) for quick, easy installation
  • Integrated lighted Arm for high visibility
  • Fast speed – raises and lowers in approximately 3.5 seconds
  • Simple mechanical linkage to DKS 1602-590 Operator
  • Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
  • Actual lane width for 12 ft. unit is 11 ft. 8 in. (3.55m)
  • Actual lane width for 14 ft. unit is 13 ft. 8 in. (4.16m)
  • Installs for thousands of dollars less than crash rated systems

 

Features
  • Surface mount for quick, easy installation
  • Fast speed – raises and lowers in approximately 3.5 seconds
  • Simple mechanical linkage to DKS 1602-590 Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
  • Red (down) / Green (up) LED lighted Barrier Arm for high visibility
Miscellaneous
  • 1602-590 Operator is sold separately.
  • 1625 wedge barrier includes linkage hardware and counterbalance weights.

 

*This Wedge Barrier System is not crash-rated. It is intended to provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane. Lane Barrier is not recommended for use in areas subject to freezing weather.

 

 

Dimensions and Weight

 

 

ANCHOR POST

8” x 8” x 1/4” Steel (203.2mm x 203.2mm x 6.35mm)
54” High + cap (1.37m)

BASE

12 in. x 58.75 in. (304.8mm x 1492mm)
1/2 in steel (12.7mm)
16 anchor points

AVAILABLE LANE WIDTH

12 Ft (3.66m), clear opening is 11 Ft 8 in (3.55m)
14 Ft (4.27m), clear opening is 13 ft 8 in (4.16m)

 

Tech Support

Quick Start Guides icon traffic

Quick Start Guides

Owners Manuals icon traffic

Owner’s Manuals

Accessory Manuals icon traffic

Accessory Manuals

Easy Connect Manuals icon traffic

Easy Connect Manuals

Tech Tip Videos icon traffic

Tech Tip Videos


Resources

1625 Traffic Control Literature
1625 Wedge Barrier | Literature
Scroll to Top
Skip to content